Please use the facility below to send us your artwork

Artwork Setup Guidelines

Before submitting artwork, please make sure you have read these guidelines carefully as we cannot accept responsibility for any incorrect printing due to setup / artwork errors.


File Formats

We only accept files in PDF, AI, EPS, JPEG, PS

Type

All Text on files must be created to outlines or converted to curves (or outlines/paths).


Settings

All Files must be set to CMYK format. Please make sure there are no spot colours or pantones in your artwork as this can output unexpected colour results. As our service is a CMYK 4 colour process we cannot guarantee to match Pantone, Ral or Spot colours.


Colour Profiles

Print files MUST NOT contain ICC colour profiles.


Use of Black

If you have files with large amounts of black in the file, we recommend using a rich black which is made up of this CMYK mix C50 / M50 / Y 50/ K100. This gives the print a deeper colour as sometimes using just black the image can look grainy and ‘washed out’


Overprints

Overprints MUST NOT be used in files.


Scaling

If your artwork is set to a scale i.e.: 1:2 (50%), 1:5 (20%), 1:10 (10%) please make sure you inform us of this in the  Comments box below.


Images

All images must be embedded into the document and saved as CMYK.


Files

Each design must be saved as a separate file or on a separate page in a multi-page file.


It is recommended to use the Adobe Distiller when creating your PDF file set to PRESS QUALITY


Sizes

The orientation of the print file must match the orientation of the product or size on order.


Resolution (DPI)

Please make sure that you save your file at least 300 dpi


Bleed & Crop Marks

Please supply all files with 5mm bleed all round. Please don’t save the files with crop marks. On banners please remember to leave clear area all around of 4cm so not to conflict with the position of the eyelets.
For Banner Pole Pockets, please contact us.


Cut to Shape

In case of an artwork being cut to shape, we require a contour cut supplied in a separate layer on an artwork file. The cut line should be a contrasting spot colour normally Magenta and named "CutContour" outline with a stroke around the area needed to be cut out, this should be clearly named in an individual layer.


Please Note

We cannot be held responsible for any spelling errors / typos / incorrect telephone numbers, or improper setup of artwork files supplied to us. If we believe that a file is incorrect before production we will contact you and request a new file. We may refuse to accept files not suitably prepared for print. Any additional operations aimed at correcting files to the above guidelines and all changes made by Tailored Displayz upon the request of the customer shall be treated as an additional service and may incur an extra surcharge.

Contact us now if you have any questions on how to set up artwork